FA Series Zero Loss Auto Drainer
The production of compressed air inevitably leads to the production of condensate. In most cases, the condensate diffuses throughout the compressed air system during transport and, as a result, damages the compressed air system, leading to increased costs. The FA series uses valves with a capacitive level sensor that detects condensation levels and discharges automatically. The ability to discharge at the right time with an electronic device can prevent the loss of compressed air and save energy.
Features
Safe:
Constant self - monitoring secures reliablitity, an LED display always indicated the current operating state. A functional test can be carried out at any time by pressing the TEST button. A potential-free contat makes it possible to relay fault signals to a control center. Allthe operator's elements and the electronic control are splash-proof and comply with IP65 protection rating (IP54 for FA11~FA13).
High Reliability:
The non-wearing capacitive sensor registers every type of condensate - including pure oil. Condensate discharge is no problem even with heavily contaminated condensate.
Economical:
The intelligent control avoids unnecessary loss of compressed air, thus permitting considerable energy savings.
User-friendly:
The electronic system consists of an integrated power unit and a control with accessible 24V direct current. After pulling the plug in connector to separate the device from the power unit. maintenance work on the device can be performed without danger. This means a qualified electrician is no longer necessary after the initial electrical installation.
Easy installation:
The connection to the compressed air system is quite simple, because the inlet and outlet of the FA11~FA13 unit are in alignment. Discharge can be arranged either through a hose or piping.
Application and Principle
Zero loss auto drainer can install with other equipment to achieve more energy saving effect.
Air Compressor
Filter
Air Tank
Refrigerated Air Dryer
Desiccant Adsorption Dryer (FDL Series)
The FA Alarm Function (FA21 above)
When the condensate cannot go out the FA will automatically change to the alarm mode:
If the FA stays in the alarm mode (malfuction not cleared automatically or by maintenance) the solenoid valve will be actuated every 4 minutes and opens for 7.5 seconds → closes again → opens after 4 minutes for 7.5 seconds → closes again → opens after 4 minutes...until switch to normal mode.
This is an absolute important feature beneath draining on demand, no air loss, reliability:
The customer can be sure that in case of whatever malfuncion in this position the FA will recognize it and you can pick off and use the alarm signal via potential-free contact to put on a central alarm / safety device system.
Technical Data
Option:
FA condensate drains are designed for different compressed air applications and operating pressure. Condensate drain FA21 to 81H are available as aluminium units for oil-contaminated condensates and may also be provided with additional hard coating for "oil free" and aggressive condensated.
Special FA models available for:
● extremly aggressive condensates● areas with potentially explosive atmospheress
● low pressure and vacuum conditionss
● discharge during no-load operation with multi-compressorss
同時亦提供防腐蝕塗層(陽極處理)機型用於腐蝕性冷凝液。還有多種配件包括加裝加熱器及導熱系統保溫外殼適用於結冰區域。
尚有其他特殊用途機型提供選配
● 抗強腐蝕性冷凝液的不銹鋼型
● 應用在易燃易爆環境的防爆型
● 多段式空壓機專用的無負荷型
● 適用微壓真空之低壓型和真空型
